As I am getting ready for the 3 day painting retreat at The Parker Ranch in Clayton, I thought I would share this earlier post on how to build a palette box. If you are handy, it's nice to make your own! - Dawn

In a recent Plein air workshop, one of the students asked me to share how I made my palette box and wet panel carrier. Of course I've had that on my to do list for months, but that was the motivation I needed to get my to sit down and work on it.

A portable palette box and wet panel carrier for plein air

I typical paint 12 x 16 when working plein air, so I made the bottom of the box large enough to hold that size once I put the sides on. 13x 17 plus the handles. Once I had the back cut out, I cut out the space that will go around my tripod. I used the jigsaw and drill with a spade bit to make this cut.

Now I have base of the palette box, I made the sides. I used 1/2 inch oak for this and cut them to size using the miter saw. Next I cut a block to bring the handle up to the same height as the sides. Now I put an adjustable bracket on the handle that will hold it on to the tripod.

This is a close up of the handle. I mitered the top piece so that it can easily slide on to the tripod and the tension will hold the box in place. Also, it can be adjusted if I ever change tripods.

Time for the folding shelves. I made two sides for the shelves first to make sure I had the measurements right, then cut the panels to make the tops. Glueing and nailing them to the frames

Okay ready for the hinges. I ran four small hinges down each side.

Here's the completed box. I put blocks on the back as well with enough open space for me to guide the panels in. I have clips on the sides that will hold the panels in place. It will hold 2 panels facing each other with plenty of space between them to keep them from touching.

I also stapled elastic to the sides, that holds my palette knives, brushes and small tubes of paint. Then put mirror hangers on the sides and attach a shoulder strap and voila!!

Okay, there you have it. I hope it's helpful

Thanks Megan for motivating me to actually do this. Let me know if you have any question!